31st International Conference of the
POLYMER PROCESSING SOCIETY
Plenary Speakers

[PL01 - June 8 (Mon) 8:50-9:30 / HALLA Hall]

Prof. Han E.H. MEIJER
Professor-emeritus, Eindhoven University of Technology, The Netherlands

Title: Fractal Structuring
Han E.H. Meijer is professor-emeritus in Polymer Technology at the TU/e, Eindhoven University of Technology, the Netherlands. He was born and educated (Gymnasium B at the famous Ignatius College) in Amsterdam and received his BS, MS, and PhD from the University of Twente. His research interests include structure development during flow and structure-property relations in polymers.

Prior to joining TU/e, first as visiting professor in the department of Polymer Chemistry and Technology, later as full professor the group Fundamental Mechanics of the department of Mechanical Engineering, he worked at DSM Research, and was active in the areas of basic research, polymer processing modeling, and explorative research. At the TU/e he supervised more than 60 PhD students that successfully completed their thesis.

Professor Meijer was co-director of the multidisciplinary Materials Technology group at TU/e, and president of the research school Eindhoven Polymer Laboratories. He was president of the international Polymer Processing Society, and for an extended period president of the Dutch Rheological Society. In 2010 he was awarded the prestigious DSM Performance Materials Award for his "exceptional contributions to the advancement of the material sciences".

[PL02 - June 8 (Mon) 9:30-10:10 / HALLA Hall]

Prof. Jinping QU
South China University of Technology, China

Title: Innovation and Development on Polymer Plasticating and Conveying Technology
Academic Qualifications
1999 PhDSichuan University
1987 MASouth China University of Technology
1981 BASouth China University of Technology

Present Position
2011 AcademicianChinese Academy of Engineering
2008 Vice ChairmanNational Engineering Laboratory of Plastics Modification and Processing
2000 DirectorThe Key Laboratory of Polymer Processing Engineering of Ministry of Education
1998 DirectorNational Engineering Research Center of Novel Equipment for Polymer Processing
1992 ProfessorSouth China University of Technology

Research, Honors and Awards
  • Mainly engaged in researching and teaching in polymer processing technology and equipment and their theory
  • Had put forward the polymer dynamic shear deformation and volume elongational deformation plasticating and conveying method and principle.
  • Had invented and successful developed a series of new polymer plasticating and conveying technology and equipment, which had received significant achievements in industrial applications.
  • Had won the second prize of the National Technology and Invention Award, the second prize of the National Science and Technology Progress Award, the gold prize of the Chinese Patent Invention Award.
  • Had obtained 20 Chinese invention patents and 3 international patents.
  • Had published more than 150 papers indexed by SCI-Science Citation Index and also published 5 monographs, one of which was published in English by Woodhead Publishing Limited.

[PL03 - June 9 (Tue) 8:30-9:10 / HALLA Hall]

Prof. Kiyohito KOYAMA
President, Yamagata University, Japan

Title: Polymer Melt Rheology for Better Processing Conditions
Prof. Koyama is widely considered to be one of the leading experts on Polymer Rheology and Processing. One of his group's major achievements is making bread from 100% rice flour. When he was the director of the venture business laboratory of Yamagata University, he started a company for manufacturing rice bread using techniques of polymer processing. In 1974 after graduating master degree from Yamagata University, he joined as an assistant professor at the same university. He obtained his Ph.D. in Engineering from Tokyo Institute of Technology in 1982. In 1992 he became a Professor at Yamagata University. Since 2014, he is also serving as the president of the University. In 2012, he received the 23rd Yamagata Prefecture Science and Technology Award. Before that, in 2006, he was awarded the society prize of the Japan Rheology Society. He is an international representative of the Polymer Processing Society and is currently a member of the selection committee for the JL. White Award. In 2006, he organized the 22nd Polymer Processing Society meeting in Yamagata. In the past, he has served in the editorial board of Rheologica Acta, Journal of Polymer Engineering and Journal of Rheology.

Education
1982 Tokyo Institute of Technology, PhD in Faculty of Engineering
1972 - 1974Yamagata University, ME in Faculty of Engineering
1968 - 1972Yamagata University, BE in Faculty of Engineering

Professional Experience
2014- PresentPresident, Yamagata University
2007- 2014Director & Vice President, Yamagata University
2004 - 2007Dean, Faculty of Engineering, Yamagata University
1999 - 2008Director, Plamedia Corporation
1999 - 2005Director, The Venture Business Laboratory, Yamagata University
1992 - Present Professor, Yamagata University
1987 - 1992Associate Professor, Yamagata University
1974 - 1987Assistant Professor, Yamagata University

Professional Activities
2005 - 2007Editorial Board, Rheologica Acta
1995 - 2004Editorial Board, Journal of Polymer Engineering
1991 - 1995Editorial Board, Journal of Rheology
Awards
2012The 23rd Yamagata Prefecture Science and Technology Award
2006The Society of Rheology, Japan, Research Award

[PL04 - June 9 (Tue) 9:10-9:50 / HALLA Hall]

Dr. Hak-Kyung SUNG
Samsung Electronics Co., Ltd., Korea

Title: Collaboration Platform of Materials and Processing Technologies for Electronics Industry
EDUCATION
1979.03~1983.02Yonsei University, Mechanical Engineering Korea, Seoul
1983.03~1985.02Yonsei University, Mechanical Engineering (Master) Korea, Seoul
1987.04~1989.03Tokyo Institute of Technology, Control Engineering (Master) Japan, Tokyo
11989.04~1992.03Tokyo Institute of Technology, Control Engineering (Ph.D.) Japan, Tokyo
WORK EXPERIENCES
1993.03~NowSamsung Electronics Manufacturing Core Technology Team (R&D), In Global Technology Center

[PL05 - June 10 (Wed) 8:30-9:10 / HALLA Hall]

Prof. Thomas P. RUSSELL
University of Massachusetts Amherst, USA

Title: Lateral Ordering in Block Copolymers: Influence of Topography, Solvent and Chain Topology
Thomas P. Russell, the Silvio O. Conte Distinguished Professor of Polymer Science and Engineering at the University of Massachusetts in Amherst, received his PhD in 1979 in Polymer Science and Engineering from the University of Massachusetts Amherst. He was a Research Associate at the Universty of Mainz (1979-1981), a Research Staff Member at the IBM Almaden Research Center in San Jose, CA (1981-96) and became a Professor of Polymer Science and Engineering at the University of Massachusetts Amherst (1997). He is currently at the Materials Science Division in the Lawrence Berkeley National Laboratory as a Visiting Scientist. His research interests include the surface and interfacial properties of polymers, phase transitions in polymers, directed self-assembly processes, the use of polymers as scaffolds and templates for the generation of nanoscopic structures, the interfacial assembly of nanoparticles, the influence of supercritical fluids on phase transitions and dynamics in polymer thin films, and wrinkling and crumpling behavior of thin polymer films. He was the Director of the Materials Research Science and Engineering Center from (1996-2009) and the Director of the Energy Frontier Research Center on Polymer-Based Materials for Harvesting Solar Energy (2009-2014) and is a lead PI in the WPI-Advanced Institute of Materials Research at Tohoku University and in the Global Research Laboratory at Seoul National University. He has over 640 publications, 21 patents and edited 5 books. He is a Fellow of the American Physical Society, Materials Research Society, Neutron Scattering Society of America, American Association for the Advancement of Science, and the American Chemical Society, Polymer Materials Science and Engineering Division. He has received the Polymer Physic Prize of the APS, the Cooperative Research Award of the ACS, the Dutch Polymer Award, is an elected member of the National Academy of Engineering, and has an h-index of 104.

[PL06 - June 10 (Wed) 9:10-9:50 / HALLA Hall]

Prof. Kookheon CHAR
Seoul National University, Korea

Title: Sulfur Plastics and Processing for Sustainable Growth
Educational Background
September 1984 - July 1989: Ph. D., Chemical Engineering, Stanford University, July 1989.
Dissertation: "Fluorescence Studies of Polymer Adsorption"
(Thesis Advisers: Alice P. Gast and Curtis W. Frank)
March 1981 - February 1983: M. S., Chemical Engineering, Korea Advanced Institute of Science and
Technology (KAIST), Dissertation: "Xylene Isomerization on Zeolite
Catalysts" (Thesis Advisers: Young Gul Kim)
March 1977 - February 1981: B. S., Chemical Engineering, Seoul National University, graduated cum laude.

Professional Experience
April 2010 Present: Director, The National Creative Research Initiative Center for Intelligent Hybrids
September 2008 Present: Professor, World Class University Program of Chemical Convergence for Energy & Environment, Seoul National University, Seoul, Korea
September 2006 Present: Adjunct Professor, Graduate School of Convergence Science and Technology, Seoul National University, Seoul, Korea
April 2001 Present: Full Professor, Seoul National University, Seoul, Korea
January 2010 December 2010: Head, School of Chemical & Biological Engineering, Seoul National University, Seoul, Korea
February 2009 August 2009: Invited Professor, Massachusetts Institute of Technology (MIT), Boston, USA
September 2006 August 2007: Associate Dean, Networking & Information, College of Engineering, Seoul National University, Seoul, Korea
September 2005 February 2006: Invited Professor, Massachusetts Institute of Technology (MIT), Boston, USA
June 2005 August 2005: Invited Professor, Ecole Superieure de Physique et Chimie Industrielle (ESPCI), Paris, France
September 1997 August 1998: Visiting Professor, Cornell University, Ithaca, N.Y., USA
June 1997 August 1997: Invited Professor, Ecole Polytechnique Federale de Lausanne (EPFL), Lausanne, Switzerland
April 1995 March 2001: Associate Professor, Seoul National University, Seoul, Korea
February 1991 March 1995: Assistant Professor, Seoul National University, Seoul, Korea
June 1990 January 1991: Senior Scientist, Lucky R&D Center, Daejeon, Korea
March 1989 March 1990: Visiting Scientist, IBM Almaden Research Center, San Jose, California, USA
January 1983 July 1984 Research Scientist, Lucky R&D Center, Daejeon, Korea

Honors and Awards
(1) KAST Full Member , The Korean Academy of Science and Technology, Korea , November 2012
(2) National Prize for the Advancement of Science and Technology, Ministry of Education, Science and Technology, Korea, April 2012
(3) Samsung Polymer Science Award, The Polymer Society of Korea, April 2012
(4) Shin-Yang Academic Achievement Award by the College of Engineering, Seoul National University, September 2011
(5) Gutenberg Research College-Fellowship, Johannes-Gutenberg University of Mainz, Germany, May 2011
(6) NAEK Full Member, National Academy of Engineering of Korea, March 2011
(7) The Merck Award, Merck Company, 2010
(8) APS Fellow, The American Physical Society, December 2010
(9) NAEK Young Engineers Award, National Academy Engineering of Korea, March 2008
(10) Gutenberg Research Award, Johannes-Gutenberg University of Mainz & The German Chemical Society, August 2006
(11) Best Chemical Engineer Award, Korean Institute of Chemical Engineers, 2005
(12) Fellowship for Oversea's Study, SBS Foundation, 2005
(13) SNU Best Achievement Award, Seoul National University, 2003
(14) Best Research Award in System IC2010 National Project, Consortium of Semiconductor Advanced Research, 2003
(15) SNU Best Achievement Award, Seoul National University, 2002
(16) Fellowship for Overseas' Study, LG Yeonam Foundation, 1997
(17) Sigma Xi, Honor Society, 1989
(18) ARCO Fellow, Stanford University, 1985 - 1986

[PL07 - June 11 (Thu) 13:30-14:10/ HALLA Hall]

※ The Lambla Award Winner
Prof. Roberto PANTANI
University of Salerno, Italy

Title: Mutual Effects of Flow and Crystallization: Analysis of Morphology Development and Hardening in a Polypropylene
Born in 1971, Roberto Pantani graduated "cum laude" in Chemical Engineering in 1995. He received the PhD degree in February 2000 from the University of Palermo, defending a thesis entitled "Analysis of Shrinkage Development in Injection Molded Samples". From 1999 to 2001 he was research fellow at University of Salerno (UNISA). From 2001 to 2007 he has been an assistant professor of Transport Phenomena at UNISA, Dept. of Chemical Engineering; since October 2007 he is Associate Professor at the same Department, which is now named "Department of Industrial Engineering" (DIIn). His main research interests focus on the analysis and simulation of injection molding of thermoplastics, of structure development in polymer processing, of mechanisms of cooling stresses development, of volume accuracy and stability during polymer processing, of processing and degradation of biodegradable polymers. His activity is characterized by the application of innovative devices, methods and original models, designed and developed with the specific purpose of characterizing polymer behavior in processing conditions, always searching for an integration of theoretical and experimental work. He collaborates with companies and research centers involved in polymer processing on the optimization of polymer processes, on the choice of materials, on polymer characterization, on the improvement of the properties of the produced parts. He is author of 2 patents, of about 75 publications on international peer reviewed scientific journals, of 5 book chapters and of more than 100 publications on proceedings of international conferences. Since 2012 he is a member of the Editorial Board of Journal of Applied Polymer Science.

[PL08 - June 11 (Thu) 14:10-14:50/ HALLA Hall]

※ The James L. White Innovation Award
Dr. Rong-Yeu CHANG
CoreTech System (Moldex3D) Co. Ltd, Taiwan

Title: Next Generation Simulation Technology and Polymeric Theories for Injection Molding Process with Industrial Complexity
Dr. Chang started academic research and industrial service in the plastics industry since 1983. He found there were a lot of plastic processing issues could be modeled with polymer physics and mathematical models, and solved comprehensively by computer simulation. Therefore, he devoted himself into developing a complete solution for injection molding simulation, and founded CoreTech System Co., Ltd. in 1995.The company has now grown to be the world's largest independent CAE software provider for injection molding, with more than 2,500 companies using its flagship product Moldex3D around the world. After retiring from Tsing Hua University, he is appointed as the CEO of the company.

Dr. Chang's research interests are not limited to numerical simulation, but also material modeling and molecular dynamics. He co-developed a new predictive model for fiber orientation simulation. This innovative model takes only 3 material parameters and can be used successfully for both short and long fibers. Except for injection molding, Dr. Chang also published numerous papers on molecular dynamics, and applied the technology to successfully simulation nano-jet and nano-imprinting problems and predicting fundamental thermodynamic and rheological properties of polymers.

Dr. Chang's major academic accomplishments include:
Developed and completed microscopic simulation core technology for molecular dynamic simulation.
Completed various fundamental 3D injection molding simulation core technology: from control volume method for injection molding simulation to predictive models of fiber orientation prediction.
Completed a series interface technologies for CAD and CAE in order to offer better solution to consider process induced material variation for virtual life cycle management of injection molding product development.
Completed various advanced CAE technology for injection molding simulation: from various variotherm simulation technology to powder injection molding simulation technology

To sum up, the most important contribution of Dr. Chang is commercialization of their academic researches into CAE software for various industrial sector applications, and continuously enhances the researches and application to strengthen and broaden the field.

EDUCATIONAL BACKGROUND
1983Doctorate Degree in Chemical Engineering at National Tsing-Hua University
1978Master Degree in Chemical Engineering at National Tsing-Hua University
1976Bachelor's Degree in Chemical Engineering at National Cheng-Kung University


EDUCATIONAL EXPERIENCE
1994 ~ 2015 Professor at National Tsing-Hua University
1992 ~ 1995,
1998 ~ 2001
Board Director at Plastics Industry Development Center
1983 ~ 1994 Associate Professor at National Tsing-Hua University
1978 ~ 1983 Lecturer at National Tsing-Hua University


PROFESSIONAL EXPERIENCE
2015 ~Present, CEO at CoreTech System Co., Ltd., Moldex3D
2004 ~Present, Chairman of Association of CAE Molding Technology, ACMT


ACADEMIC AWARDS
1988Young Scholar's Achievement Award by Industry and Engineering Society of China
1991Remarkable Teaching Award by National Tsing-Hua University and Ministry of Education, Taiwan
1991Sun Yat Sen Academic and Cultural Award of Inventions
1995Outstanding Engineering Professors of CIE Award by Chinese Institute of Engineers
1996Joint Development Award by Ministry of Education, Taiwan
2013Application of Polymer Processing Award by The Polymer Society, Taipe


COMPANY AWARDS
20018TH Taiwan SMEs Innovation Award by Ministry of Economic Affairs, Taiwan
20036TH Rising Star Award by Ministry of Economic Affairs, Taiwan
200816TH Excellent Enterprise Innovation Award by Ministry of Economic Affairs, Taiwan
2010Award of Excellent Brand in Taiwan by Taiwan External Trade Development Council
2014Selected by Ministry of Economic Affairs, Taiwan to become a member of "The Enterprises as Backbones of Industries Leaping Promotion Program"
[상호]한국유변학회 대표자:윤경환 사업자등록번호 : 220-82-01332 135-703 서울시 강남구 테헤란로7길 22 한국과학기술회관 신관 806호
TEL : (02)3452-5117 / 5118 FAX : (02)3452-5119 E-mail : ksr@ksr.or.kr
The Korean Society of Rheology (Tax no.: 220-82-01332)
No. 806, 135-703 (635-4, Yeoksam-Dong) 22, 7 Gil, Teheran-ro, Gangnam-Gu 135-703 Seoul, Korea